首页 > 工作 > 求职文档 > 自我介绍 > 英文自我介绍 > 测量员英文自我评价(推荐29篇)正文

《测量员英文自我评价(推荐29篇)》

时间:

测量员英文自我评价(通用29篇)

测量员英文自我评价 篇1

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the company's financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the company's management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the company's development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

测量员英文自我评价 篇2

Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six months.In these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.

From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.

1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;

2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;

4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.

Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.

3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the company's advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!

测量员英文自我评价 篇3

Passionate, cheerful personality I, good psychological quality, life, work optimistic, sincere, frank, good interpersonal relationships, can endure hardship, have strong adaptability and self-learning ability, not susceptible to external environment interference.

In learning, I have good grades, many times to be rewarded. In the study of professional knowledge, but also pay more attention to the combination of theory and practice. The use of spare time to learn the food industry related to other content, so that knowledge can be adapted to social development.

At school, I have been a student cadre, a strong sense of responsibility, a strong organizational skills, leadership and a good team spirit.

I have a wide range of interests, like reading, listening to music, sports, participated in various cultural and sports activities in various schools and colleges of activities to achieve good results.

测量员英文自我评价 篇4

Self-evaluation: 1. engaged in production, administration, finance, audit and other work, accumulated a wealth of practice management experience, to lay the foundation for carrying out the audit work.

2. Good character and ethics, honest and trustworthy, "Entrusted by the people, loyalty and business of the people";

3. Strong environmental adaptability and sense of learning

4. The objective, fair and proper values, a better grasp of auditing principles and practical operational flexibility "degree";

Hobbies: Tennis, swimming, running

测量员英文自我评价 篇5

years in July graduated from work, I have from a naive student gradually grow into a qualified technical staff, after several years of on-site practical work, I have summed up a suit of their own procedures. Over the past few years I have been engaged in mechanical turning, milling, CNC lathe. Now is engaged in: the fixture set, CAD drawings, machining process scheduling and workshop director.

In the project I was responsible for technical management, work has been conscientious and meticulous work, has been pursuing scientific management, strict construction quality requirements to ensure that the construction of a check pass rate of 100%. In the management work, I strengthen the quality management, cost management, schedule management, security management.

In quality management, I put the quality of life-long responsibility system to strengthen the management, a clear responsibility to strengthen the responsibility of the management card as the focus of the construction process, thus ensuring the quality of the construction process qualified, while increasing the quality of day-to-day management, To the process failure shall not be carried out under the procedures of construction, to ensure that every process control. At the same time to strengthen the construction of pre-construction technical disclosure, the preparation and implementation of the program supervision. Work in the strict implementation of various standards, to strengthen the process of quality control, the implementation of quality wage system, high quality and competitive prices, to create a quality project has played a catalytic role.

In the cost management, in the construction cost to do a good job before the forecast, the construction cost management in the implementation of dynamic monitoring and management, so that the project cost has always been orderly and controllable management system to run. In the actual construction, it is forbidden to carry out large-scale rework in the field, rationally use materials, make use of old materials and waste materials, and minimize the project input. Meanwhile, strengthen the management of machinery, regularly inspect and do well maintenance and improve the comprehensive utilization rate. run.

In order to ensure that the control point construction task is completed on time, I carefully organize, do a good job of construction preparation, the implementation of the weekly plan, the implementation of the project plan for the project management, Management, to the Japanese security week, to Zhoubao month. Reasonable division of the construction phase, the use of parallel flow construction method. Strengthen the safety management on the construction site for a long time, on-site construction environment is responsible for the characteristics of frequent intertwined operations to strengthen the construction site safety management, and strengthen employee self-protection awareness, insist on safety work in the first place, strengthen the safety , Fire education, and establish the safety of all people, and everyone to implement the provisions of fire safety, so that every day about security, and every day to implement security, check every day security. Years of on-site work I have been a positive attitude to play to their strengths, and actively work. 20xx Petrochemical Company in Dalian, a distillation expansion project proposed rationalization proposals for the project to save money 200,000 yuan, not only reduces the difficulty of construction and improve the efficiency of construction, in the tight schedule, the task of large, difficult operating conditions Reasonable division of the construction phase to ensure the quality of the construction in advance to complete the creation of good conditions, won the Party, the Commissioner and many other leaders of the highly praised. I have been involved in the work of the main work, but I engaged in or involved in other work there are many: If the project has been involved in a number of tender work, project management and other pre-settlement. In all my work, can be responsible, positive thinking, and constantly learn new knowledge, comprehensive and final consideration of the project construction, the successful completion of the leadership to the various tasks. Over the years I was named the company's top ten young people, outstanding staff, writing papers, rationalization proposals, construction technology program has been rated as outstanding works.

测量员英文自我评价 篇6

As a unit of a cashier, in charge of the company's daily income and expenditure, self-inductance work pressure, so at work on their own requirements are very strict, careful effort, so since joining the work, especially in social leadership and colleagues Care and support, to consciously abide by the country's financial policies and regulations, strictly implement the tasks assigned by higher authorities, conscientiously perform their duties, and strive to complete their work, has not been a big mistake. The following is my work identification:

First, abide by the rules and regulations, perform job responsibilities.

In the cashier work, be able to adhere to the daily business at the end of serious rolling cash income, pay the amount of the registration book, the amount of money to pay the cash register, double the counter, double tube library 'requirements,' self- And check with the cash inventory to ensure that the cash inventory and the actual inventory of cash, general ledger balance, consistent with the accounts do, accounts match. To seriously deal with the size of the RMB currency, the exchange of damage currency business, the whole point to be accurate, pier Qi, pick the net, tied tightly, seal clear, timely check on the water accounts and cash receipts and registers. In strict accordance with the vault storage system, do a good job in the Treasury of the custody of the Treasury in charge, with the same into the same.

Second, forge ahead in unity and work together to create a good working environment.

"Solidarity with others, and people are good" has always been my criteria for others. In the work, to unite colleagues, live in harmony, learn from each other, promote each other; in life, help each other, mutual concern and work together to create a harmonious atmosphere. At the same time, continue to self-positioning, update their ideas, improve service awareness, enhance service levels.

Third, enhance awareness of prevention, the implementation of the "three anti-one."

Security aspects. Work more and more, I can continue to enhance the sense of security precautions, the duty period to keep strictly in accordance with the "three anti-one" requirements, conscientiously implement the preventive measures, memorize anti-theft anti-riot plan, master, Kinds of prevention equipment, do a good job "three" anti-lock check. Often check the circuit, the phone is normal, to prevent the performance of the device is in good condition, when the abnormal situation can be handled on the spot on the spot processing, can not deal with the initiative to the upper reporting, etc., can always keep a clear head, enhance security awareness , And to ensure that the 24-hour duty-bound to keep out of control, to protect the credit of the property security.

Fourth, strengthen theoretical study, improve their overall quality.

Over the past year, I have been able to take the initiative to study the country's financial policies and regulations and the spirit of the document issued by the association, strengthen ideological and moral construction, improve professional training, establish a correct outlook on life and values; to strengthen their sense of love and dedication To cultivate, to further enhance the sense of responsibility, dedication to the spirit of ownership of their own work, so that "dry line, love line, special line", firmly establish the "social Xing Xing I, To fully establish the "customer first" service concept, the quality of civilization as a measure of the work of the standards to strict demands on themselves, and consciously accept the supervision of our customers regularly carry out criticism and self-criticism, and strive to be a To participate in credit cooperatives to actively participate in various learning and training activities, conscientiously do study notes, and in practical work to be used in their spare time, self-study undergraduate courses, to participate in distance education examinations, for betterTo adapt to the needs of each job to lay a good foundation.

In short, the understanding of their work to have a higher awareness, and constantly strengthen themselves, improve work efficiency and accuracy, although in this regard there are still many deficiencies, such as financial accounting knowledge is not enough, the unit reform to beFurther understanding, etc., but I believe that the leadership of the care and support at the next level, with the enthusiastic help of colleagues, I will certainly do a better job stable and better for the new year will have better results.

测量员英文自我评价 篇7

years is approaching, review the past years, a sense of almost thousands. During the period to seriously abide by the rules and regulations of the company, love plants such as love home, but also in the work of constantly demanding their own, with the production of the process work, carefully completed the task of leading the layout. Diligent and enterprising, to be creative, to continuously improve their own work efficiency, work problems can be found in time to report to the leadership and to find a solution. In order to make greater contributions to the development of the company.

Forklift is the indispensable tool for production, as a forklift driver, must adhere to the post, serving the production of the work. Forklift with the class every day must be used with the packaging class to receive bags, finished packaging storage placed; with the use of handyman with additives, from the use of oil raw materials, empty oil drums finishing.

First, the work results

1, in line with the packaging class to receive the work of the bag, 20 minutes per shift to work in advance to help with the work of the packaging.

2, the production peak season, seven packaging lines at the same time boot, forklift task overload operation, the two forklift drivers must be division of labor, it takes more than an hour to return to the packaging mouth to help packaging finished product storage work. In the meantime, another forklift driver with seven production lines need to work in the library, it must have a more skilled professional skills and flexible thinking ability to complete the task in an orderly manner. In such a tense working environment, I can not disrupt, in strict accordance with the warehousing requirements of finished products placed in the work.

3, in the use of additives, with the mixed with a good job, a clear position of additives placed to help the correct use of good handyman, including the variety, quantity, in strict accordance with the laborers with a single recipients associated with the requisition process.

4, fork grease must be clear that the use of phospholipids and fish oil situation, in strict accordance with the warehouse manager's logo fork with, if the warehouse manager failed to do a good sign, must first communicate with the warehouse manager to do a good job marking, eliminate the use of errors Or can not be used on a first-in-first-out basis. And fork to the workshop before the use of varieties, regional requirements placed, and in the pumping process in strict accordance with the requirements of the fork with the fork into the corresponding oil pool, no personal reasons affect the production, to ensure the smooth development of production. Before get off work, assist the handyman to store the empty oil bucket into the oil bucket area and keep the sanitation of the production area.

测量员英文自我评价 篇8

years I engaged in the management of technical quality, the job for me is a new starting point for the work.Technical management position is the construction of the project's comprehensive technical quality management and ensure the effective operation of quality system. It includes the following work: organization and implementation of national, regional and sector technical quality of the laws and regulations, standards, documents; responsible for the project's technical quality management; learn from the industry's advanced construction methods or own unique construction methods in the Promote the implementation of the enterprise, and constantly improve the construction methods and improve the management level;

According to the status quo and long-term development planning to do a good job of technical training.Therefore, I have done the following work in this department: The management of technology management has implemented Kanban management.Implementation of Kanban management is an important measure of our company's management. Through the implementation of kanban management, we have opened up the distribution level, which fully embodies the principles of distribution of labor according to work and the principle of "no labor is less." In the implementation process, according to the kanban management related implementation plan and the stipulation, according to the general procedure to the team and the operation group issued the task book, the task book clearly stipulated the construction request, to receive the material, the material construction procedure and the piece work day, Check the completion of the task book to verify the piece rate. During the period, the supply department, technical management departments and other relevant personnel to cooperate with each other, to ensure that the project on schedule, high-quality, safe completion.

I have a solid foundation in technical management for many years, the system is sound, but I think the technical force for the younger phenomenon, in particular, should strengthen the construction program targeted and operability and construction summary of scientific and practical. For each project we construct, I summarize the complete construction features, procedures and methods. As a technical accumulation, if necessary, sorted out by the same kind of system data. Can guide the construction of the future, but also for the tender to provide basic information. In the preparation of the program at the end we have issued a method of operating instructions issued in order to sort out a set of practical data for the completion of chemical refining system for the preparation of instructions for the newly joined technicians to complete the completion of the information provided on the convenience.

As a technical quality management staff, in the future I will be 100 times the enthusiasm to meet new challenges, continue to improve the technological development system and strengthen the ability of technological innovation, the formation of high, large, refined, sharp as the core competitiveness of theTechnical differences and competitive advantages, and gradually establish a complete and efficient technology development system, the formation of the project unified technical management, implementation of the classification, the goal of assessment, mutual support, resource sharing technology management system.

测量员英文自我评价 篇9

I call ×××, in ×××, ××× current position. In the past year, courtesy of all the leaders and colleagues of care and help, through their tireless efforts to better accomplish various tasks. End personal self-identification will now work to report, a total of four aspects:

1, the ideological and political aspects: positive thinking progress, high political consciousness, and always maintain the advanced nature and purity of party members, dare to fight against all kinds of reactionary ideas. Emancipating the mind, seeking truth from facts, advance with the times, can be dialectical, rational view of things and problems, the face of major events always remain sober-minded. I love the motherland, love the people, adhere to the Four Cardinal Principles, and resolutely support the leadership of the Communist Party of China, to respond positively to the call of the party, the party's cause with confidence.

Personal goals and their long-term planning consistent direction, always maintain a positive initiative, consciously abide by company rules and regulations.

2, learning: adhere to the learning and self-improvement as an important way to improve both the unit and the branch actively participate in various learning organization, and carried out extensive self-study. In addition to learning content and political theory to know the party's principles and policies, but also involves the history, economy, science and technology, computers, and knowledge of the business. Learning only pay attention to the ways and means, but also pay attention to the actual results.

3, work: detailed work plan, subject to arrangements, serious and responsible, practical work hard, pragmatic. Everything proactive difficulties, striving to be the vanguard, fearless tired.

4, aspects of life: thrift, care of public property, pay attention to health, labor of love, self-discipline, honesty, fame, helpfulness, respect for leadership, unity and colleagues, decent conversation, manners and generous to keep the image.

In addition to these advantages, it also still some shortcomings and deficiencies, mainly the study was not thorough enough, not strong enough political acumen, work methods is defective, writing skills solid enough to be further improved and enhanced in the future work.

I want to use my beautiful youth, to light around each person's passion, inspired inspires colleagues for our dedication to the cause, progressive, meritorious, Jianye ......

For faster, better improve the management level, technical level and operational capacity to adapt to the development of modern science and technology, and have improved their ability to make progress in all aspects, and this is done in recent years, professional and technical aspects of the work of self-identification . In the future, I want to continue to learn all aspects of professional knowledge, continue to research and explore topics field, determined in future work to and make greater contribution.

测量员英文自我评价 篇10

Today, although the last day of training, but the mood was like the weather at this time, happiness and happiness in the rising temperature. Today's lecture is still very exciting, today's harvest the most shocking. I will remember these "shock":

1. Evaluation is not simply to assess how much knowledge students have, remember how much knowledge, but to evaluate what can be done with this knowledge and in the process of learning knowledge, emotions, learning strategies such as changes and improvements.

2. The new curriculum emphasizes that evaluation should be combined with formative and final evaluation to increase the dimension of evaluation, not only pay attention to the learning process, but also pay attention to learning results, and strive to reflect the curriculum content "people-oriented" core idea

In the evaluation, we should respect the needs of students and the law of physical and mental development, respect the students' emotions, pay attention to mobilize the enthusiasm of students, on the basis of research, design, implementation evaluation.This is the deep meaning of the student body.

We should take into account the age, psychological characteristics and cognitive level of students according to the characteristics of each stage of teaching and evaluation purposes, choose reasonable and diverse evaluation methods such as self-evaluation, peer evaluation, parental evaluation, teacher evaluation, etc.Formative and summative evaluation.

Such as: language performance (role-playing, recitation recitation, chart presentation, project research, experimental reports, classroom teaching evaluation, etc.), observation and analysis records (student performance records, student reflection, activity overall performance, student growth record bags) Interpersonal communication (interview, individual conversation, group discussion, speech debate, etc.), testability evaluation (standardized test, stage test, unit test, random test, etc.).

5. Formative evaluation principles are: incentive principle (to make students like the evaluation, so that students experience

(Students are the main body of learning and evaluation of the main, to encourage students to actively take the initiative to evaluate their own learning and reflection), students participate in classroom activities is the formative evaluation of the situation, Formative evaluation and teaching are closely related and diverse, and can be "test and non-test, teacher evaluation, student self-evaluation and student mutual evaluation of the combination of" and so on.

6. Language teaching is not with reading a few words, analyze a few sentence structure, explain a few grammar tense

Can work. We should be in a certain period of time, such as the first stage, leading students to learn how to evaluate their own learning interest, how to use the portfolio to evaluate themselves.

测量员英文自我评价 篇11

Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six months.In these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.

From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.

1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;

2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;

4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.

Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.

3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the company's advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!

测量员英文自我评价 篇12

As a unit of a cashier, in charge of the company's daily income and expenditure, self-inductance work pressure, so at work on their own requirements are very strict, careful effort, so since joining the work, especially in social leadership and colleagues Care and support, to consciously abide by the country's financial policies and regulations, strictly implement the tasks assigned by higher authorities, conscientiously perform their duties, and strive to complete their work, has not been a big mistake. The following is my work identification:

First, abide by the rules and regulations, perform job responsibilities.

In the cashier work, be able to adhere to the daily business at the end of serious rolling cash income, pay the amount of the registration book, the amount of money to pay the cash register, double the counter, double tube library 'requirements,' self- And check with the cash inventory to ensure that the cash inventory and the actual inventory of cash, general ledger balance, consistent with the accounts do, accounts match. To seriously deal with the size of the RMB currency, the exchange of damage currency business, the whole point to be accurate, pier Qi, pick the net, tied tightly, seal clear, timely check on the water accounts and cash receipts and registers. In strict accordance with the vault storage system, do a good job in the Treasury of the custody of the Treasury in charge, with the same into the same.

Second, forge ahead in unity and work together to create a good working environment.

"Solidarity with others, and people are good" has always been my criteria for others. In the work, to unite colleagues, live in harmony, learn from each other, promote each other; in life, help each other, mutual concern and work together to create a harmonious atmosphere. At the same time, continue to self-positioning, update their ideas, improve service awareness, enhance service levels.

Third, enhance awareness of prevention, the implementation of the "three anti-one."

Security aspects. Work more and more, I can continue to enhance the sense of security precautions, the duty period to keep strictly in accordance with the "three anti-one" requirements, conscientiously implement the preventive measures, memorize anti-theft anti-riot plan, master, Kinds of prevention equipment, do a good job "three" anti-lock check. Often check the circuit, the phone is normal, to prevent the performance of the device is in good condition, when the abnormal situation can be handled on the spot on the spot processing, can not deal with the initiative to the upper reporting, etc., can always keep a clear head, enhance security awareness , And to ensure that the 24-hour duty-bound to keep out of control, to protect the credit of the property security.

Fourth, strengthen theoretical study, improve their overall quality.

Over the past year, I have been able to take the initiative to study the country's financial policies and regulations and the spirit of the document issued by the association, strengthen ideological and moral construction, improve professional training, establish a correct outlook on life and values; to strengthen their sense of love and dedication To cultivate, to further enhance the sense of responsibility, dedication to the spirit of ownership of their own work, so that "dry line, love line, special line", firmly establish the "social Xing Xing I, To fully establish the "customer first" service concept, the quality of civilization as a measure of the work of the standards to strict demands on themselves, and consciously accept the supervision of our customers regularly carry out criticism and self-criticism, and strive to be a To participate in credit cooperatives to actively participate in various learning and training activities, conscientiously do study notes, and in practical work to be used in their spare time, self-study undergraduate courses, to participate in distance education examinations, for betterTo adapt to the needs of each job to lay a good foundation.

In short, the understanding of their work to have a higher awareness, and constantly strengthen themselves, improve work efficiency and accuracy, although in this regard there are still many deficiencies, such as financial accounting knowledge is not enough, the unit reform to beFurther understanding, etc., but I believe that the leadership of the care and support at the next level, with the enthusiastic help of colleagues, I will certainly do a better job stable and better for the new year will have better results.

测量员英文自我评价 篇13

As an accountant, in all aspects of business are careful about, patience, enthusiasm. Since the work, due to their continuous efforts, in all respects have made great progress. Work is also a successful completion, and now the individual identification is as follows:

First, have good work skills

Cashier external units more settlement, is an image window; internal is a service window, internal staff reimbursement is frequent, is a masters. So I have to do is not confused, tickets on the spot error-free, inventory cash fast and accurate, not only to grasp the financial policy, dry up the work also handy, have strong operational capacity, plans, computer, Money everything is accurate, busy and not chaos.

Second, the sense of innovation

In the eyes of many people is a major invention of innovation is what, it is not true, as long as the actual work from the start, to improve the actual work, to promote practical work to a new level, is innovation. I have this spirit. I work for the staff reimbursement of travel expenses reimbursement and the original invoice paste sheet, are made through my reasonable proposals after the improvement of the voucher paper size selection, the original document paste single filling format, the original paste single Requirements of the content design, font layout requirements, the back of the original paste paste the attention of managers, not only to improve the work, more importantly, is to put the accounting file binding and management.

Third, there is a responsible attitude

1, the strict implementation of cash management and settlement system, regular checks to the accounting cash and accounts and found that the amount of cash does not match, so that timely treatment.

2, the timely recovery of the company's income, out of receipts, cash withdrawals in time to the bank, never sit cash.

3, according to the basis for providing accounting, teaching staff wages and other timely payment of funds to be paid. I am hard working, willing to endure hardship, willing to sacrifice. This year, due to the overall relocation and standardization of the basis of accounting rectification work, the intensity and difficulty of financial work has increased. In addition to complete the reimbursement work, I also take care of Corey's back office work and other business. In order to complete the task according to the quality and quantity, I do not care about personal gains and losses, not pay, sacrifice personal interests, often work overtime. In work to develop willing to endure hardship, willing to sacrifice the spirit of the work can always be hard working, conscientious. In the completion of the task of reimbursement, taking into account the back office, do a good job budget, the management of labor camp deposits, excellent work to complete the task, played a role in advanced and role models.

测量员英文自我评价 篇14

In this school year, I am in the study, strict demands on themselves, assiduously, studious, correct attitude, clear objectives, basically mastered some of the professional knowledge. In addition to the study of professional knowledge, I also pay attention to the expansion of knowledge, extensive knowledge of other disciplines, thus improving their ideological and cultural quality, to become a good college students Fighting.

In ideology, I called for active progress, love the motherland, love the people, support the leadership of the Communist Party of China, support the principles and policies, abide by national laws and regulations and the rules and regulations to actively move closer to the party, book. I have a strong ambition, the courage to criticize and self-criticism, and establish a correct outlook on life and values. In life, to develop a good living habits, life is full and structured, there is a strict attitude towards life and good attitude to life and life style, warm and generous, honest and trustworthy, helpful, have their own good accident principle, can And students live in harmony; actively participate in various extracurricular activities, which continue to enrich their own experience.

测量员英文自我评价 篇15

On July 9th, 20xx, I went to Wenquan Town of Xifeng County together with 14 other students to start our 6-month internship. During this period, I was assigned to the office of the Social Affairs Office. Responsible for rural reconstruction in 20xx the end of the work and rural reconstruction in 20xx and four in the rural areas in the rural well-off construction work carried out.

Six months of working experience, let me gradually familiar with their work, but also improve the quality of all aspects of work, but also accumulated a certain amount of work experience. My work is monotonous and repetitive, but this is the most effective way of tempering the will, I told myself to be completed, to do everything in the process of difficulties, we must strive to not give up.

Six months of internship I learned a lot: first, the work of the government departments have a deeper understanding, but also more determined the direction of the future; work, we continue to apply the knowledge of books to practice, to The instructors learn excellent work experience, and thus lay the foundation for their future work.

This is not only a simple internship, or a life experience, is a valuable asset in life. Thanks to the town government to give us such a warm contact with the grassroots level, understand the opportunities of the grassroots. In the future, I want to participate in more social practice, honing their own at the same time so that they continue to grow.

测量员英文自我评价 篇16

In the past year, as a team leader, deeply feel themselves shoulder the workshop production and team members safe sustenance and responsibility.This year through the study of the company and plant, workshop production line and general manager of the 36-word approach, quality and efficiency strategies, a profound understanding of "quality and efficiency" of the importance. According to the safety and production tasks put forward at the beginning of the year by the branch and workshop, we should work together with the whole class to work out the situation, clarify the target and implement the plan in light of the reality. Dedication and consciously engaged in work practice for the full completion of the production tasks, to achieve the safe operation of the team year to do their due obligations. In the team and all the staff working life, although busy, but always maintain a sense of balance, always remember that he is a leader of the soldiers.

The head of the team is a locomotive, is a great responsibility, how to really see the safe operation of the road and ensure the safety of passengers on the car to reach their destination is their duty, so the team leader is a special soldier. They must understand the knowledge business, but also good management.Years of work practice to make their own touch a superficial rules: as long as the spirit of the upper class, eyes down, mind the whole class, combined with the actual conditions, we can find work ideas, and then progressive, drive overall.

Therefore, starting from the important post, the master is a special post, job uncertainties, random strong, to do a good job in the production team and even the overall work, you must operate from the master and master control, the master operating time and on-site operationPersonnel management, and do a good job between the convergence and cooperation with each other, so that the next line, twisted into a strong, so that the master play a central control role.

With a certain way of thinking, in the specific operation and focus on the following two aspects: First, try to create harmony without losing the principle of good atmosphere, creating a harmonious and relaxed working environment; Second, the team members to play the initiative and ownership, A high degree of democratic management team. Improve the team leader as the core, the four members of the backbone of the management system, so that everything was tube, everything was done, clear responsibility for all responsibilities, give full play to each employee's enthusiasm and creativity, and strictly enforce the team A series of rules and regulations, so that everyone is equal before the system. Strengthen team members self-management awareness, to a certain extent, to maximize its own energy, in the team-based management system, self-examination, self-control, self-evaluation, the class staff to establish a strong sense of responsibility and mission. In this way, a solid foundation for team management, and all aspects of work will have a guarantee. From the situation throughout the year, the results are obvious. To do a good job in the overall work group, relying on the joint efforts of all staff, but to give full play to the enthusiasm of each group of workers must have a good image of the class leader, as a group of long, both producers, but also Unnamed managers, I always clear that only by setting an example, take the lead, the staff can trust, listen to, Qi efforts. Ask yourself to complete the task, his first completed, put their own image in the team, with their own practical actions to influence the team members, and to drive them to do so.

In view of this year's production situation, the steel situation is grim, the company proposed quality and efficiency initiatives, the timely organization of the class to carry out "quality and efficiency" and "back to the big debate" activities, and the class talk about feelings, To analyze the team in the "quality and efficiency" work and safety problems, combined with the actual work team developed effective preventive measures, and through the corresponding system to ensure that the security situation throughout the year and stable development, quality and efficiency Work carried out smoothly and orderly.

This year, the production tasks and all aspects of work is indeed busy at the end of the year due to 2 and 3 kiln kiln kiln a single high pressure, lime abnormal quality fluctuations, etc., team actively with the workshop leading to the production site careful analysis, inspection at the same time , And according to the specific circumstances of decomposition to each device point, each process, each person, and dynamically adjust the output of each class. Other team members also take into account the overall situation, selfless dedication, as long as the teams need to meet the call, and some employees returned to the team put forward a series of personal analysis of data and personal opinion, these are indeed commendable.

测量员英文自我评价 篇17

In the past year, as a team leader, deeply feel themselves shoulder the workshop production and team members safe sustenance and responsibility.This year through the study of the company and plant, workshop production line and general manager of the 36-word approach, quality and efficiency strategies, a profound understanding of "quality and efficiency" of the importance. According to the safety and production tasks put forward at the beginning of the year by the branch and workshop, we should work together with the whole class to work out the situation, clarify the target and implement the plan in light of the reality. Dedication and consciously engaged in work practice for the full completion of the production tasks, to achieve the safe operation of the team year to do their due obligations. In the team and all the staff working life, although busy, but always maintain a sense of balance, always remember that he is a leader of the soldiers.

The head of the team is a locomotive, is a great responsibility, how to really see the safe operation of the road and ensure the safety of passengers on the car to reach their destination is their duty, so the team leader is a special soldier. They must understand the knowledge business, but also good management.Years of work practice to make their own touch a superficial rules: as long as the spirit of the upper class, eyes down, mind the whole class, combined with the actual conditions, we can find work ideas, and then progressive, drive overall.

Therefore, starting from the important post, the master is a special post, job uncertainties, random strong, to do a good job in the production team and even the overall work, you must operate from the master and master control, the master operating time and on-site operationPersonnel management, and do a good job between the convergence and cooperation with each other, so that the next line, twisted into a strong, so that the master play a central control role.

With a certain way of thinking, in the specific operation and focus on the following two aspects: First, try to create harmony without losing the principle of good atmosphere, creating a harmonious and relaxed working environment; Second, the team members to play the initiative and ownership, A high degree of democratic management team. Improve the team leader as the core, the four members of the backbone of the management system, so that everything was tube, everything was done, clear responsibility for all responsibilities, give full play to each employee's enthusiasm and creativity, and strictly enforce the team A series of rules and regulations, so that everyone is equal before the system. Strengthen team members self-management awareness, to a certain extent, to maximize its own energy, in the team-based management system, self-examination, self-control, self-evaluation, the class staff to establish a strong sense of responsibility and mission. In this way, a solid foundation for team management, and all aspects of work will have a guarantee. From the situation throughout the year, the results are obvious. To do a good job in the overall work group, relying on the joint efforts of all staff, but to give full play to the enthusiasm of each group of workers must have a good image of the class leader, as a group of long, both producers, but also Unnamed managers, I always clear that only by setting an example, take the lead, the staff can trust, listen to, Qi efforts. Ask yourself to complete the task, his first completed, put their own image in the team, with their own practical actions to influence the team members, and to drive them to do so.

In view of this year's production situation, the steel situation is grim, the company proposed quality and efficiency initiatives, the timely organization of the class to carry out "quality and efficiency" and "back to the big debate" activities, and the class talk about feelings, To analyze the team in the "quality and efficiency" work and safety problems, combined with the actual work team developed effective preventive measures, and through the corresponding system to ensure that the security situation throughout the year and stable development, quality and efficiency Work carried out smoothly and orderly.

This year, the production tasks and all aspects of work is indeed busy at the end of the year due to 2 and 3 kiln kiln kiln a single high pressure, lime abnormal quality fluctuations, etc., team actively with the workshop leading to the production site careful analysis, inspection at the same time , And according to the specific circumstances of decomposition to each device point, each process, each person, and dynamically adjust the output of each class. Other team members also take into account the overall situation, selfless dedication, as long as the teams need to meet the call, and some employees returned to the team put forward a series of personal analysis of data and personal opinion, these are indeed commendable.

From the beginning of the year the team developed the corresponding measures:

First, improve the network operating skills. Weekly economic accounting The daily temperature control is transmitted over the network to supervisors.

Second, the establishment of five equipment management, environmental health sub-regional and assigned to individuals.

Third, strengthen the organization and implementation of the master control and coordination and supervision of the furnace to ensure that the operation is correct.

Fourth, adhere to the class of not less than 3 times the inspection, to ensure that all equipment on duty to maintain the best condition.

Fifth, in improving some of the relevant management system, based on the actual production this year, the team developed a series of economic indicators and dynamic monitoring.

Recalling the work of the past year, slightly obtained, and this can not be separated from the care and guidance of the organization, but also inseparable from the whole class comrades, through thick and thin results. I am convinced that a person's ability is limited, the key is to what kind of attitude towards their work, in their own positions, do a love, down to earth, firmly grasp the letter itself

From the moment to do, to master attitude, work diligently to do their jobs, which is their desire to have been pursued. In the past, the work of self-control, self-improvement, self-improvement.

测量员英文自我评价 篇18

I think the first task of college students or learn cultural knowledge, so I learn in the sense, not to relax. I think a good learning method is very helpful to learn the knowledge, so every day after learning, I will summarize the learning experience. A hard one harvest, often see their achievements in progress, I will sigh as long as you have the determination, nothing is impossible. For students of our computer-related majors, the knowledge of light optics is not enough.

I use the spare time often read computer class books, and participated in a number of computer-level qualification examination, and achieved good results. I think that learning is the student's occupation, the occupation also need to have wisdom, perseverance and perseverance. In today 's fast - growing information age, I We only learn new knowledge, we will not lag behind! Overall, this semester for their achievements or decent. Single digital image processing Although this course did not learn too much of the content, but also on its basic principles have a certain understanding.

测量员英文自我评价 篇19

After a semester of study, I learned a lot of knowledge, basically adapted to the high school life. And in the school which participated in the school chorus, art teacher to help open class, was named the school three good students; - from Fangshan District, a high school student electronic platform

★ blink of an eye, high school's first semester has passed. At the same time as a representative of the language, I can also finish the task of the teacher layout; this semester I also organized a class meeting, conducted speeches, "I have been able to do a good job in this class, "Unconsciously I have the ability to improve in all aspects. I also recognize their own shortcomings, such as the lack of systematic study of the contents of the review, I do not know where to start from scratch; physical activity is not active and so on.

★ I am learning this semester progress, especially in math scores more prominent. However, I have not fully meet the goals set, mainly because they did not develop good study habits, lazy thinking is more serious, there are luck, but also the degree of effort is not enough.

测量员英文自我评价 篇20

I am cheerful, athletic, energetic, warm, sincere. Serious and responsible work, initiative, hard working, can earnestly fulfill every task assigned to me. Have strong organizational skills, practical ability and teamwork spirit, able to quickly adapt to the environment, and the integration of them.

测量员英文自我评价 篇21

During this period to seriously comply with the rules and regulations of the new group, love plants such as love home, but also at work

Constantly strict demands on themselves, with the Ministry of the production process work, the layout of the leadership to complete the various tasks. Diligent and enterprising, innovative, and continuously improve their work efficiency and found that the work of the problems in a timely manner to report to the leadership and seek solutions to the company's development and make greater contributions.

First, study with great concentration, conscious temper.

Although I took the forklift driving license is not long, just started, the operation is not particularly skilled, but in the course of my study, and consciously temper. After 3 months, I have been able to carry out skilled operation control, posts for three months to basically no mistakes, the ability to work has been greatly improved. For the future to complete the work to lay a solid foundation. I will continue in the next work, to further improve my professional level, at the same time to do a better job.

Second, strict requirements, love and respect their jobs.

Work in strict demands on themselves, diligent, love and respect their jobs, do not bow before difficulties do not back in front of the work, high-quality completed the work. In future work, I will humbly ask experienced instructors, and constantly sum up experience, to make up for their own deficiencies. At the same time, continue to learn a variety of theoretical knowledge and professional skills for the company's contribution to the development of their own strength!

Third, strengthen training, improve operational skills.

In order to do their work well, I make full use of limited time, strengthen the operation skills training, improve the efficiency of loading and unloading operations to ensure the safety of loading and unloading operations.Like trucks, before the operation must be loaded with the number of pieces of goods, specifications for serious study to determine the code put standard, so as to ensure the volume filled with the vehicle. I remember the beginning of forklift operations, I have flip twice.Since then, I have to strengthen all aspects of skills training, and achieved good results, summed up a set of forklift driver training methods.

Fourth, diligent in the repair, security protection.

As a driver, always bear in mind the important task of their own to ensure that leaders and comrades ride safety as their responsibility to maintain a high degree of concentration in the driving, and in strict accordance with the operating rules and road traffic rules, do foolproof. A little free, they studied with great concentration all kinds of traffic laws and regulations, compliance safety driving.Often read the traffic book, will be a variety of traffic routes memorize in the heart, driving in detours, less bad road, fuel-efficient festival. In the vehicle repair and maintenance, when a good "doctor" and "beautician" the dual role of the vehicle ground maintenance, ground maintenance, ground cleaning, skilled master of various vehicle technical performance, failure to remove, the vehicle is always in good condition status.

In the work of 20xx, although achieved certain achievements and progress, but the problems can not be ignored, such as: their own quality to be further improved, the sense of service to be improved and so on. In the future work, I will try to make up for these shortcomings, and comprehensively improve their overall quality, business level, quality of service.

Some people say that the choice of the driver on the choice of hard work, I will certainly be with the future of the hardship of the professional partner, but I will not regret it, because I am willing to pay for the cause of my enthusiasm, , I am willing to love this dedication to all the work.

测量员英文自我评价 篇22

Two weeks of measurement practice, I got a more comprehensive, systematic exercise, but also learned a lot of books can not learn the knowledge and skills.

I remember the first week of internship, we are very excited, a week down we feel very relaxed, rest for two days, began measuring practice, I followed the teacher to find the control point, then everyone is still excited, that the next Of the week should also be very easy, it is not.Although a bit lucky, but we all learn a lot, only a lot of ordinary "a lot of shopping" to learn things. I like to think, like the summary, so I summed up the following points:

Grow up, to try to take some responsibility. We are born with a kind of inertia, whether individuals, or a team, if it is in an inert atmosphere, that she (people) efficiency will not be high, but if everyone has a strong sense of responsibility, Take some responsibility, then the efficiency is not only improved, and the task will be completed very well.

Infectivity is very important. In a team, in order to have a good atmosphere, the first person to put forward the idea of thinking is very important, because later people can not help but have a herd mentality. If he (she) the idea is positive, then someone will actively think of some problems. On the contrary, the whole team into a negative atmosphere. Therefore, each of us should actively think about the problem.

Think a lot. What is the internship, internship is the theoretical knowledge into their own knowledge of the process. Internship process only a lot of thinking, in order to digest a lot of knowledge, but also extends a lot of previously unknown. Teamwork, through thick and thin. This is a cliché, but in this practice have to mention, because it is everywhere, remember very clearly that many times we are on the measurement site for lunch; is that we all get up early, and then in the cold Whiz in the operation, everyone in the trembling; we are carrying the instrument touched the black home. All this bitter and happy, we all bear together. Through thick and thin, we are happy! Learn to compromise. Compromise is the highest art, in the process of cooperation, inevitably there will be some conflicts, then we need to calm down to think about the solution to the problem, everyone has done some concessions, then things are easy to solve.Do the most "humble" work, tree arrogant self-esteem. A good team, everyone needs a little hard work, not afraid of dirty, not afraid of tired, rather than pushing three or four. Only everyone is actively doing everything, in order to achieve the purpose of the internship, so that everyone is familiar with every aspect.

To calm. Whether doing things or a man, we should learn to calmly face. Remember half of the picture, the teacher pointed out that we are wrong method of mapping, we have thought would be wrong; remember the distance with a tape measure we have thought about measuring only once. But in the end we did not do, now think of it, this is right! Frankly, is what we want life.

Internship is completed, the internship is the most unforgettable day of my life, very afraid of the beginning, and now want to come, the day is over, and can get good interns, so get a revelation: no matter what difficulties,Do not lose confidence in yourself.

测量员英文自我评价 篇23

Dedication and highly motivated, work and study seriously humble attitude, their work can be easy to use, can fully appreciate the importance of teamwork, to have a unique design ideas and methods, there is meticulous work, has a strong plasticity. We hope to long-term stability in the unit through a period of learning, to become familiar with the process of the project, good performance of the program and the final implementation of the project and is responsible for the whole process, to become a real industry in senior staff.

测量员英文自我评价 篇24

Since the car mechanic qualification in 20xx, has always been in line with the line, love line, fine line of work attitude, with full enthusiasm, and strive to forge ahead. In the work abide by the "product quality is the life of the enterprise," the creed, deeply shoulder the heavy responsibility to deal with strict self-discipline, meticulous and strict quality control, in strict accordance with the operating procedures and quality requirements for production, the work is summarized as follows: Work tasks in the work, the ideological, on the one hand, pay attention to political theory study, and strive to improve political literacy, on the other hand to strengthen the business knowledge of learning, improve operational capacity. In the leadership of the guidance and the support of colleagues with the help of a planned conduct of the theoretical knowledge and the study of turning technology. Seriously do a good job within the division.In doing this work at the same time I also submitted to the party to join the party application in daily life, work, I have been asked to ask a party member himself, and strive to learn what they have learned through, borrow "car mechanic practical manual "And other books, give up a lot of rest and entertainment time, study hard, and constantly improve their level of business theory. I always adhere to the business knowledge to be applied to the production of flexible, to apply their knowledge, combined with their many years in the practice of turning the practical experience to master the rules of the problem, to explore a set of practical production and easy to learn Found the problem of skills, improve the accuracy of the operator and work efficiency has played a significant role in helping, 1.5 sequence round table milling machine processing part of the fillet at the traces of the steps, affecting the quality of parts. The reason is because the fixture locking force is not enough, through repeated tests, repeated debugging Zhang angle, and ultimately eliminate the step problem. 2.35 sequence drilling machine tooling due to bad processing, with the technical staff actively ideas, think of a way to solve the tooling of the processing problems.

测量员英文自我评价 篇25

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

测量员英文自我评价 篇26

Students join the team Hualian nine months time, I made a full scholar emotional changes that can be independently buyer. Young people with enthusiasm for the work, tireless refined every day. Strong adaptability and good communication skills with leadership and assistance, work colleagues. Since the work of eight months, I have learned how to better understand the intent of the leadership, the better abide by our obligation to work, proactive work to identify existing problems, solve problems, and develop a good at summary, purposeful plan good habits. Here, the 20xx annual work points the following four aspects of self-assessment:

First, the discipline, strictly comply with the rules and regulations already in-depth bone marrow, respect for leadership, solidarity and co-workers have become potential consciousness. Strict demands on themselves, never late or left early. Depending on the company as their home, take good care of the company's various public facilities, set an example proactive maintenance, cleaning office actively regional health, love and protect our excellent office environment, improve their overall quality. Because I know that in future work, corporate culture, the environment is the need of each of us to love.

Second, in the business of learning, he has been asking himself accelerate the pace of progress, the only way the business is not lost on anyone. Although there is no aspect of procurement experience, but I have been xiu basic skills, you will learn professional knowledge into energy. Superiors to learn the essentials of business, consult work skills, problems with the right attitude, careful rigorous analysis work encountered. Actively participate in the training organized by the company, a broad understanding of business knowledge and broaden the work of thinking. In the work on their own and responsible attitude, there are plans to carry out targeted research, and the corresponding record focus, learn new things, so that control of the situation in negotiations with suppliers.

Third, the care of others in terms of ideological training, keep its promises, resolute honest, friendly easy-going, willing to sacrifice. Looking back along the way, bit by bit, only to find that not only love my job, my department, and I was so loving colleagues around me. "Many hands make light", I was to fire the general enthusiasm infected colleagues around Hualian with love and write a brilliant tomorrow.

Fourth, at work, down to earth, diligent, humbly accept criticism superiors guidance, active exchange learning experiences with colleagues. Because I know that in such a good extended family often look back at the road traveled, summing up the past, manage the present. Firmly we believe that through their own efforts, can do better in the only good team.

Looking back, I have matured a lot, pay a lot. But these were not enough, waiting for me to do, there are many places to improve. In 20xx I want to continue to improve their professional training and practical operation level. Strengthen collaboration with other departments and communication skills for future work between various departments better to lay a solid foundation for cooperation. Better to learn from other colleagues to approach the problem, the problem of empathy angle. With a grateful heart, never give up in the face of difficulties, more full of passion for work beyond the self, self-improvement. Hualian tomorrow for our hard work ahead, and Hualian same oath to live and grow.

I engaged with a single and procurement work more than two years, has a good professional attitude, realistic and motivated, sincere people, good communication skills, ability to adapt. It has strong market research capabilities and organization, communication and coordination skills. Skilled use of office software. Familiar factory purchasing, quality, production, warehouse and a series with a single process. Of machinery products more familiar with the material, with abundant sources of supply to meet the procurement requirements of the product. And look for a good price, parity, bargaining power, the independent development of new suppliers and maintenance of the material procurement process tracking, return, replacement and other abnormalities can be handled independently. Strong negotiation and coordination

测量员英文自我评价 篇27

Since July 21 joined Road Equity Investment Fund Management Co., Ltd., with the leadership and colleagues in the company's teaching, training and help, making me in the ideological, work, study all aspects have been improved to varying degrees. Some of the previous work experience and school-related exercise in the work I have engaged in this now have some help, but many things need to re-understand and experience. Learning and practice can produce results of mutual integration, which are inseparable from the patient leadership unit of instruction and intangible body and mind, which I sincerely express my gratitude. Now my probation period since the relevant work summary is as follows:

1. Reimbursement: in strict accordance with the requirements of the financial system, handling expenses reimbursement matters, handling cash, online banking, check the receipt and payment business, so that the cash Nissin statements, reimbursement accurate, and special circumstances, special treatment.

2. Software accounting: timely registration in the financial software, cash, bank accounts, accurate receipt and payment, and regular checks with bank accounts.

3. Statement: according to the weekly capital statements, according to the needs of the preparation of balance sheet.

4. Cash, bills, check and document management: cash and notes management properly, perfect, notes and documents received in time registration, so that evidence to follow.

5. Payroll: the monthly payment of wages in a timely manner and accurate.

6. Banks matters: the daily banking business, mainly including the use of reserve funds, bank account opening, financial products to purchase, the public \ private money receipt and payment, the end of the month and the beginning of bank statements print, bulk card, credit card And so on with the bank docking matters.

7. Fixed asset management: do software card entry timely, accurate, when the physical inventory inventory, and regular inventory.

8. Financial-related system modification, layout, according to the company's financial system documentation, the production of financial expenses reimbursement process (visio diagram) and the corresponding PPT.

9. According to the business center needs, leadership requirements, collect and organize the financial analysis of the data required to produce the appropriate chart and formatting.

10. Timely and efficient completion of the leadership of the other tasks, to help other departments do the relevant financial work.

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the company's financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the company's management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the company's development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

测量员英文自我评价 篇28

years in July graduated from work, I have from a naive student gradually grow into a qualified technical staff, after several years of on-site practical work, I have summed up a suit of their own procedures. Over the past few years I have been engaged in mechanical turning, milling, CNC lathe. Now is engaged in: the fixture set, CAD drawings, machining process scheduling and workshop director.

In the project I was responsible for technical management, work has been conscientious and meticulous work, has been pursuing scientific management, strict construction quality requirements to ensure that the construction of a check pass rate of 100%. In the management work, I strengthen the quality management, cost management, schedule management, security management.

In quality management, I put the quality of life-long responsibility system to strengthen the management, a clear responsibility to strengthen the responsibility of the management card as the focus of the construction process, thus ensuring the quality of the construction process qualified, while increasing the quality of day-to-day management, To the process failure shall not be carried out under the procedures of construction, to ensure that every process control. At the same time to strengthen the construction of pre-construction technical disclosure, the preparation and implementation of the program supervision. Work in the strict implementation of various standards, to strengthen the process of quality control, the implementation of quality wage system, high quality and competitive prices, to create a quality project has played a catalytic role.

In the cost management, in the construction cost to do a good job before the forecast, the construction cost management in the implementation of dynamic monitoring and management, so that the project cost has always been orderly and controllable management system to run. In the actual construction, it is forbidden to carry out large-scale rework in the field, rationally use materials, make use of old materials and waste materials, and minimize the project input. Meanwhile, strengthen the management of machinery, regularly inspect and do well maintenance and improve the comprehensive utilization rate. run.

In order to ensure that the control point construction task is completed on time, I carefully organize, do a good job of construction preparation, the implementation of the weekly plan, the implementation of the project plan for the project management, Management, to the Japanese security week, to Zhoubao month. Reasonable division of the construction phase, the use of parallel flow construction method. Strengthen the safety management on the construction site for a long time, on-site construction environment is responsible for the characteristics of frequent intertwined operations to strengthen the construction site safety management, and strengthen employee self-protection awareness, insist on safety work in the first place, strengthen the safety , Fire education, and establish the safety of all people, and everyone to implement the provisions of fire safety, so that every day about security, and every day to implement security, check every day security. Years of on-site work I have been a positive attitude to play to their strengths, and actively work. 20xx Petrochemical Company in Dalian, a distillation expansion project proposed rationalization proposals for the project to save money 200,000 yuan, not only reduces the difficulty of construction and improve the efficiency of construction, in the tight schedule, the task of large, difficult operating conditions Reasonable division of the construction phase to ensure the quality of the construction in advance to complete the creation of good conditions, won the Party, the Commissioner and many other leaders of the highly praised. I have been involved in the work of the main work, but I engaged in or involved in other work there are many: If the project has been involved in a number of tender work, project management and other pre-settlement. In all my work, can be responsible, positive thinking, and constantly learn new knowledge, comprehensive and final consideration of the project construction, the successful completion of the leadership to the various tasks. Over the years I was named the company's top ten young people, outstanding staff, writing papers, rationalization proposals, construction technology program has been rated as outstanding works.

测量员英文自我评价 篇29

First, have good work skills

Cashier external units more settlement, is an image window; internal is a service window, internal staff reimbursement is frequent, is a masters. So I have to do is not confused, tickets on the spot error-free, inventory cash fast and accurate, not only to grasp the financial policy, dry up the work also handy, have strong operational capacity, plans, computer, Money everything is accurate, busy and not chaos.

Second, the sense of innovation

In the eyes of many people is a major invention of innovation is what, it is not true, as long as the actual work from the start, to improve the actual work, to promote practical work to a new level, is innovation. I have this spirit. I work for the staff reimbursement of travel expenses, reimbursement and the original invoice paste sheet, are made through my reasonable proposals after the improvement of the voucher paper size selection, the original document paste single filling format, the original paste Single requirements of the content design, font layout requirements, printed on the back of the original paste operator note, not only to improve the work, more importantly, is to put the accounting file binding and management.

Third, there is a responsible attitude

1, the strict implementation of cash management and settlement system, regular checks to the accounting cash and accounts and found that the amount of cash does not match, so that timely treatment.

2, the timely recovery of the company's income, out of receipts, cash withdrawals in time to the bank, never sit cash.

3, according to the basis for providing accounting, teaching staff wages and other timely payment of funds to be paid.

Fourth, there are honest and clean spirit

Constantly improve their professional ethics, the cashier is a special occupation, it is in contact with a lot a day a lot of money, tens of thousands of banknotes, really worthy of the hands of family wealth. Without good professional ethics, it is difficult to pass the "money off." Compared with other accountants, as a cashier I should strictly abide by.

Work always have errors, as long as we find out the reasons from each trip, summed up the lessons, failing to make the same mistakes, our work will continue to progress, slowly there will be improvement, in fact, excellent On the original in the occupation of a good work habits.